BV1/STB
Automatic, vertical staple-setting machine Mod. BV1-SW with one filling tool and two drills for production of INDUSTRIAL CYLINDERS, ROTARY BRUSHES (disc brushes) and LAG BRUSHES (rectangular brushes) complete with: 4 electronic axes of movement that are achieved via a PC and ''brushless'' servo motors (one of the axes can perform a double movement): the four axes of movement allow for radial and parallel tufting or any combination. The maximum flare angle for cylinder and lag brushes is 20º on one end of the length of the brush and 30º on the opposite end. For rotary brushes, the maximum outside flare angle is 30ºIn regard to filling tool stroke, this machine is manufactured in two versions: 85 mm stroke, that has a filling tool range of 3 mm - 7,5 mm and can work a maximum length of fiber of 300 mm (unfolded) 135 mm stroke, that has a filling tool range of 5 mm - 12 mm and can work a maximum length of fiber of 400 mm (unfolded). The machine comes with a single stock box (for natural, synthetic or metallic fibers) or can be ordered with a double stock box (for synthetic fibers). The extreme versatility of the machine allows the user to change from a cylinder brush, to a lag brush to a rotary brush in a matter of minutes. Brush dimensions that the machine can produce in one machine cycle: Cylinder Brushes Brush block length: up to 3000 mm (118'')Brush block outside diameter: 30 - 300 mm (1,2'' - 11,8'') Maximum overall brush diameter with fiber: 400 m (15,75'') Lag Brushes Brush block length: up to 3000 mm (118'') Brush block width: 20 - 300 mm (0,8'' - 11,8'') Rotary Brushes Brush block diameter: 70 - 380 mm (2,75'' - 15'') Maximum length of fibre of 380 mm (15'') An automatic and state-of-the-art lubrication system keeps maintenance to a minimum. The machine meets all requirements in laws for Safety and Health imposed by the European Community and it is certified by the ''CE'' mark. Production: Up to 450 tufts/minute (85 mm filling tool stroke) Up to 350 tufts/minute (135 mm filling tool stroke). Compressed air pressure: 7 bar (100 psi) Power draw: 17 KW Overall dimensions: 4900 x 2350 x 2350 mm (193'' x 93'' x 93'') For 1500 version which can produce cylinder and lag brushes with a maximum length of 1500 mm (60'') Weight: 2300 Kg (5100 Lbs) For 1500 version
