Bilplast Grapindo

Series MGF MGF-ST Gravimetric Feeder Simple, Accurate, Affordable Throughput capacity: Injection molding –Up to 40.0 lb/hr(18 kg/hr), Extrusion –Up to 120.0 lb/hr(55 kg/hr) The MGF proven loss-in-weight technology automatically calibrates itself, totally eliminating manual catch-and-weigh calibration procedures and even more common and ...

Series MCF Automatic Speed Control Using digital input, the microprocessor detects and automatically compensates for changing cycle times, varying torque requirements, and/or fluctuations in plant voltage. This eliminates the need for monitoring and adjustment. As an option, the controller may be remotely positioned up to 20 ft. from the processing ...

Series MLG 'Little Guy' Concentrate These Maguire feeders are designed expressly for installation on small injection molding machines. The motor is positioned on one side and the hopper on the other to evenly balance the weight of the feeder over the feed throat of the machine. Remote Controls A remote control configuration further reduces the ...

Series MPF The MPF powder feeder is designed to handle powders that do NOT flow well. The hopper features an integral bridge breaker bar that sweeps the bottom of the hopper once every 2 turns of the auger. This bridge breaker serves to keep the flights of the auger full and assures accurate metering. The hopper capacity is restricted to about 1/2 ...