Bilplast Grapindo

Video link in the production process£ºhttp://v.youku.com/v_show/id_XNjA1NzQwMTQw.html

When the other manufacturers still focus on strengthening mechanical rigidity, Powerjet has already proposed the new technology concept as follows after many years of research.

Injected acceleration is the key factor in the production of thin-wall products as fast food boxes.

KF-series special injection molding machine for thin-wall fast food box

Low temperature, low pressure, fast response speed

¡ñInnovative design of plasticizing system achieves low-temperature injection; it makes the machine energy-saving, environmental, and manufactures products with high tenacity and toughness.
¡ñAdvanced hydraulic system achieves low pressure injection; it makes the machine gain better mechanical protection, have longer mould service life, and manufactures products with low stress and deformation.
¡ñOptimized control system achieves fast response speed; it makes the machine obtain higher shot rate in a short time and reaches the best within 0.3 seconds. 

1.High-speed High-speed molding design shortens the cycle time of production.
Good durability of mature double injection cylinder is more better than the single cylinder injection. 0	Low resistance linear guide rail, positioning precision, fast response, high repeatability.

2.Energy Saving Energy saving design lowers the cost of production to the bottom.
Special oil-circuit design greatly improves the injected acceleration & movement.	Standard ceramic heater is used to achieve the energy saving and environmental protection. 0

3.Stable High stability design can stabilize the production, improve the rate of finished products£¬and extend the service life.

High rigid mechanical design can meet the demand of fast mechanical movement. 4.Durable High-rigidity machine design achieves longer service life. The standard configuration of multi-sets of air blowing is designed specially for fast cycle production.

Innovative design can optimize the plasticizing effect and reduce the heating temperature in production, which results in energy saving and environmental protection, and can produce higher flexible and non-friable products.

Parameter:


Remarks:According to upgrading of machine, we will change techical parameters, configuration of some parts and service¡¯s items without further notice.

Platen Dimensions£º


Production Instance

Machine Model£ºKF-258S Product£º1000ml rectangular box Cavity£º2 Thickness of product£º0.36 Weight£º17g Material£ºPP Production cycle time£º4.5s

Video link in the production process£ºhttp://v.youku.com/v_show/id_XNjA1NzQwMTQw.html