KF-338V6 High Speed Injection Molding Machine For Thin-wall Products

Product Name£º KF-338V6 high speed injection molding machine for thin-wall products
Product Type£º KF-338V6
Clicks£º 70Times
Product Information£º


AD£ºhttp://v.youku.com/v_show/id_XNzQ3MzU1NDM2.html



¡¤Innovative design of plasticizing system achieves low-temperature injection; it makes the machine energy-saving, environmental, and manufactures products with high tenacity and toughness.
¡¤Advanced hydraulic system achieves low pressure injection; it makes the machine gain better mechanical protection, have longer mould service life, and manufactures products with low stress and deformation.
¡¤Optimized control system achieves fast response speed; it makes the machine obtain higher shot rate in a short time and reaches the best within 0.3 seconds.


Accumulator assists high speed injection, and the injection speed can reach over 650mm/s. Lighter and thinner products can be produced to meet the requirement.		   Close-loop servo injection control makes accumulator to be controlled precisely in the injection process, and makes the products¡¯ deviation of each lot smaller and quality more stable.
  Special oil-circuit design greatly improves the injected acceleration & movement.

 
High rigid mechanical design can stabilize the production, improve the rate of finished products£¬and extend the service life.


The new optimized screw and barrel combination makes the production material temperature much lower, thus making the products with high toughness but not crisp.


Standard ceramic heating device is energy saving and environmental protection.


Good durability of mature double injection cylinder is more better than the single cylinder injection.


Low resistance linear guide rail, positioning precision, fast response, high repeatability.


High stability design can meet the demand of fast mechanical movement.


The standard configuration of multi-sets of air blowing is designed specially for fast cycle production.



Parameter

Remarks:According to upgrading of machine, we will change techical parameters, configuration of some parts and service¡¯s items without further notice.

Platen Dimensions£º


Production Instance

Machine model£ºPKF-338V6
Product£º1000ml food box
Cavity£º4
Thickness£º0.4mm
Weight£º18g
Material£ºPP
Production cycle time£º5s		  

More applications for high speed thin-wall products injection molding machine can be chosen:
¡¤Servo motor or variable-pump
¡¤Closed-loop pump
¡¤Synchronous charging & mold opening
¡¤Servo valve positioning for mold opening
¡¤Servo valve & accumulator injection
¡¤Synchronous ejection & mold opening
¡¤Special screw for PC can be chosen


KF Series: Disposable fast food box production system
¡¤To provide a full set of production system for fast food box, with shorter production cycle, higher stability, and more economy.
¡¤To provide options from the workshop planning to mold selection, and from product planning to machine selection. To offer complete set of machine and molds with 2,4, or even 8 cavities. 


PKF Series: In Mold Labeling production system
¡¤With high-performance automatic IML system;
¡¤the mold with high strength and high toughness;
¡¤together with mature and stable machine; the system has high repeat accuracy, and high efficiency for product labeling.


MKF Series: Medical syringe production system
The machine is especially for medical syringe product in clean room, and with the hot runner mold, to realize new upgrade on medical products. 
¡¤Machine in fully enclosed design
¡¤Closed lubrication system
¡¤Design with no oil in product area 


CKF Series: Special system for the production of bottle cap
The machine is an upgraded design for more rapid production of various kinds of bottle cap on KF series


Special applications for PC
To product sorts of high precision electrical equipments and electronic parts in PC, with a better forming and less deviation!

AD£ºhttp://v.youku.com/v_show/id_XNzQ3MzU1NDM2.html