BOY 25 E VV

BOY 25 E VV - Insert moulding with new dimensions

 

Insert moulding with new dimensions
Insert moulding with new dimensions

 

With a clamping force of 250 kN, the BOY 25 E VV insert moulding machine fills the gap between the BOY XS V (100kN) and the BOY 35 E VV (350kN). The BOY 55 E VV completes the BOY insert moulding machine series.

 

This reliable BOY machine series has proven itself for over 35 years in thousands of applications worldwide. The advantage of BOY insert moulding machines is in its basic design of a two platen clamping unit with a fixed lower platen.

 

The BOY 25 E VV, the successor to the very successful BOY 22 A VV, has clearly been improved in terms of efficiency, clamping force, quietness, and accessibility. In addition, the footprint has been reduced by nearly 11%.

 

Users appreciate in addition the good working ergonomics; suitable working heights result in a small distance to the mould space.

 

Up-to-date Hydraulics

The hydraulic pump on the BOY 25 E VV compared with the previous model provides an increase in delivery volume as well as faster and more dynamic travel speeds. Flow and friction resistance are reduced considerably by the hydraulic system of the clamping unit. As a result, the cycle time according to EUROMAP 6 is decreased to about one second.

 

Advantages

  • Compact design with a footprint of. 1.37 m²
  • Energy-efficient, smooth running servo drive
  • Intuitive operable machine control Procan ALPHA ®
  • Ideal possibilities for automation and Integration
  • User-friendly automation possibilities (e.g. with Y-table, robots, light barriers, etc.)

 

Tecnical data

Euromap-size: 
250-11 / 250-15/18 / 250-52

Clamping force: 
250 kN / 25,5 metric tons / 25,5 tons

Max. daylight between platen: 
400 mm

Distance between tie bars: 
254 mm

Max. shot volume: 
76,4 cm3 (theoretical)

 

 

Economic, quiet, precise and fast - this is how BOY injection moulding machines operate. BOY is a leading producer of fully-hydraulic injection moulding machines with a clamping force below 1.000 kN that are designed for the fully automatic processing of thermoplastics, elastomes, silicones, PIM, hotmelt and many other plastic materials. BOY stands for maximum economy, best energy efficiency through low energy consumption and reliable quality - Made in Germany. The servo motor pump drive, the compact design and the cantilevered two platen locking system are features that mark these products at the top of the plastic processing industry. Since 1968, BOY has shipped more than 40.000 injection moulding machines worldwide.

 

BOY XS, BOY 22, BOY 25 E,  BOY 35, BOY 50, BOY 60, BOY 80, BOY 100, BOY XS V, BOY 25 E VV, BOY 35 V, BOY 55 E VV, BOY 2C XS