Air Cooled Water Industrial Chiller 8kw To 16kw
Detailed Info
Features of HTIE series (economicalindustrial chillers):
· R22 refrigerant,
· DANFOSS world famous Hermetic scroll compressor,
· Cast iron pump,
· Stainless steel built-in tank,
· Door mounted disconnect switch,
· Original Schneider electrical components,
· Standard operating and safety controls
· Ventilated control cabinet
· Mounted Casters
· Indoor operation
· Water-proof electrical chamber
· Removable panels for easy service access
· Tank level alarm/switch
· high COP: up to 3.4
Options
· System pump pressure bypass valve
· SS pump
· Copeland, Sanyo, Daikin compressor
· Other type refrigerant, R47c,R134a, R510a, R404A, etc.
· Mounted Casters for bigger models
· Plate heat exchanger/Stainless steel shell and tube evaporator
· Dust filter for condenser
· Vibration isolation floor mounts
· Variable speed system pump
· Flow switch
· Remote operating/monitoring panel
· Hot gas by-pass
Specification----Air cooled industrial chiller---Packaged and Economical design
| Model | HTIE-3A | HTIE-4A | HTIE-5A | HTIE-6A | |||
| nominal cooling capacity | kcal/h | 6803 | 10449 | 11920 | 13091 | ||
| kw | 7.91 | 12.15 | 13.86 | 16.22 | |||
| Max power consumption | kw | 3.37 | 4.17 | 5.68 | 6.38 | ||
| power source | 3PH 380V-415V 50HZ | ||||||
| refrigerant | type | R22 | |||||
| control | Thermostatic expansion valve | ||||||
| compressor | type | hermetic scroll | |||||
| power | kw | 2.7 | 3.5 | 4.55 | 5.25 | ||
| condenser | type | finned copper tube + low noise outer rotor fan | |||||
| evaporator | type | Copper coil built-in storage tank | |||||
| coolant flow | m3/h | 1.36 | 2.09 | 2.22 | 2.6 | ||
| Tank volume | liter | 50 | 60 | 60 | 110 | ||
| inlet and outlet | inch | 1 | 1 | 1 | 1 | ||
| dimension | length | mm | 980 | 980 | 1120 | 1120 | |
| width | mm | 560 | 560 | 610 | 610 | ||
| height | mm | 1320 | 1320 | 1390 | 1390 | ||
| weight | kg | 132 | 145 | 165 | 183 | ||
Remarks:
1.the nominal cooling capacities are based on the following conditions:
coolant supply 7C, return 12C, temperature difference 3C to 8C;
cooling air inlet 30C, outlet 38C;
2. chiller should be used under 40C.
3. Specifications, appearances and dimensions are subject to change without notice.
1.the nominal cooling capacities are based on the following conditions:
coolant supply 7C, return 12C, temperature difference 3C to 8C;
cooling air inlet 30C, outlet 38C;
2. chiller should be used under 40C.
3. Specifications, appearances and dimensions are subject to change without notice.
