Air Cooled Industrial Chiller--8kw To 17kw
Detailed Info
Features of HTI series (standard industrial chillers):
· CE standard design,
· high COP,
· R407c, friendly type refrigerant,
· Copeland or Danfoss world famous hermetic scroll compressor,
· Domestic or world famous brand Stainless steel pump,
· Stainless steel built-in tank,
· Door mounted disconnect switch,
· Original Schneider electrical components,
· Standard operating and safety controls
· Ventilated control cabinet
· Indoor operation
· Water-proof electrical chamber
· Removable panels for easy service access
· Mounted Casters
· Tank level alarm/switch, High and Low pressure switch,
Inner thermostat for compressor motor, three phase over current protection,
compressor overload protection, fan overload protection , pump
overload protection
· Shell and tube condenser
· Low noise and high efficiency finned tube condenser
Options
· System pump pressure bypass valve
· Other type refrigerant, R22, R404A, R410A
etc.
· Plate heat exchanger/Stainless steel shell and tube
evaporator
· Dust filter for condenser
· Vibration isolation floor mounts
· Variable speed system pump
· Remote operating/monitoring panel
· Level switch,
· Flow switch,
· Hot gas by pass,
· Anti-freezing protection
· OEM/ODM SERVICE
Specification----Envrionmental air cooled industrial chiller
| Model | HTI-3A | HTI-4A | HTI-5A | HTI-6A | |||
| nominal cooling capacity | kw | 7.91 | 12.15 | 13.86 | 16.22 | ||
| power source | 3PH 380V-415V 50HZ | ||||||
| refrigerant | type | R407C | |||||
| control | Thermostatic expansion valve | ||||||
| compressor | type | hermetic scroll | |||||
| power | kw | 2.7 | 3.5 | 4.55 | 5.25 | ||
| condenser | type | Finned copper tube + low noise outer rotor fan | |||||
| evaporator | type | Copper coil built-in storage tank | |||||
| coolant flow | m3/h | 1.36 | 2.09 | 2.22 | 2.6 | ||
| Tank volume | liter | 50 | 60 | 60 | 110 | ||
| inlet and outlet | inch | 1 | 1 | 1 | 1 | ||
| dimension | length | mm | 980 | 980 | 1120 | 1120 | |
| width | mm | 560 | 560 | 610 | 610 | ||
| height | mm | 1320 | 1320 | 1390 | 1390 | ||
| weight | kg | 132 | 145 | 165 | 183 | ||
Remarks:
1.the nominal cooling capacities are based on the following conditions:
coolant supply 7C, return 12C, temperature difference 3C to 8C;
cooling air inlet 30C, outlet 38C;
2. chiller should be used under 40C.
3. Specifications, appearances and dimensions are subject to change without notice.
